14oz. Can, TR HIGH-TEMP Mold Release Wax (12 or more)
# 306B Mold Sealer, an easily applied soft paste wax solution that can be brushed or wiped on. It is a combination primer, sealer and release agent. Works especially well on porous mold surfaces, nonskid surfaces or where surface is not polished.
Partall Paste # 2, a wax based compound useful as a general purpose parting agent on molds as well as a prime coat for Partall Film #10, a water soluble, film forming material. Used as a parting layer for separation between polyester or epoxy and various mold surfaces. Product Bulletin: General InformationMSDS
Partall Film # 10, a film forming water/alcohol solution used as a parting or barrier layer for separation between polyester or epoxy and various mold or tool surfaces. Spray, brush, or wipe on mold or tool surface. Water soluble for release of complex or deep parts. Product Bulletin: General Information MSDS
Chemlease 70-90 semi-permanent mold release agent, bonds molecularly to mold surface allowing many parts to be pulled from the mold with out re-applying release (10 or more depending on the part geometry and wetout method). Good for parts that will be post painted or bonded to as the release does not come off on the part.