|
|
|
|
|
|
Fiberglass Supply About Us Product Catalog ScuttleButt Ordering Misc. Info Links |
|
|
||||||||||||||||||||||||||||||||||
|
|
|
System Three Resin® is a 100% solids, unfilled, medium-modulus general purpose epoxy system suited to over 90% of all epoxy applications. It works great for new wood construction and repair, for gel coat blister repair and for general fiberglass boat repair. User friendly 2:1 volume ratio with any of the three hardeners. System Three Epoxy has excellent pot life and cure-time control. Use at temperatures as low as 35º F with no limitations on humidity. System Three Epoxy cures to a very tough, resilient, clear film. The medium to low viscosity of System Three Epoxy allow the use “as is” for coating and fiberglass work. Combine with different fillers to make excellent adhesive, filleting and fairing compounds. When selecting a hardener, consider the minimum temperature expected during application, and the required pot life. Combine the hardeners to provide a continuous range of cure times within the extremes of the Fast (#1) and Slow (#3). Refer to The Epoxy Book (2 Megs)to make proper selection. See Technical Data Sheet and MSDS for additional information. |
|
|||||||||||||||||||||||||||||||||||||
|
|
|
|
*** #3 Hardener is not recommended for coating applications unless cure temperatures exceed 75º F. |
|
|
|
Set time is the approximate time it takes for a thin epoxy film to “set”. At this point it will no longer flow and is tack-free to the lightest touch but still tacky to a heavy touch. See Epoxy Book for more detailed information. |
|
|
 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||
|
|
|
|
System Three SilverTip Epoxy Products |
|
|
|
System Three SilverTip products are application specific epoxy solutions. The SilverTip product range encompasses a laminating resin, a sag resistant adhesive, a quik-curing fairing compound, and a pre-mixed filleting compound. This system is designed with ease of use in mind and is made from high quality components. |
|
|
 |
|
|
|
SilverTip Laminating Resin is a med-low viscosity, liquid epoxy system that has been optimized for coating and reinforcing fabric saturation in wood-composite boatbuilding. It will outperform any other product in these applications. SilverTip Laminating Resin is designed for use with fiberglass, Kevlar, Dynel and graphite as well as on bare wood. It has superior wet-out characteristics with little tendency to foam or trap air. Both the resin and hardener are nearly colorless and are used in an easy 2:1 volumetric ratio. SilverTip Laminating Resin cures to a brilliant blush-free film with either the fast or slow hardener eliminating secondary bonding concerns as experienced with other epoxies. The working time is longer than most boat building epoxies without sacrificing cure time. The cured film is tough and resilient with better heat resistance than other room temperature cured epoxies. Fillers, wood flour, and bulking agents can be combined with SilverTip Laminating Resin, however we do not recommend this approach. Instead we suggest using the other members of the SilverTip Series for adhesive, filleting and fairing applications. |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||
|
|
||||||||||||||||||||||
|
|
|||||||||||||||||||
|
|
|
 |
|
|
|
GelMagic is a toughened, non-sagging, two component, structural epoxy adhesive designed for superior bonding to wood and most porous materials. It is unique in that it starts as two self-leveling liquids, which immediately form a soft, thixotropic, non-sagging paste when mixed. Measuring is easily accomplished by either volume or weight. GelMagic requires no additional modification with fillers and can be applied to vertical and overhead surfaces without running, eliminating the mess and waste associated with other epoxies. Gel-Magic exhibits exceptionally high peel strength and employs a state of the art, two-phase epoxy morphology, which creates an adhesive bond that is more tough, resilient, resistant to embrittlement and possess better elevated temperature properties than other room temperature cured epoxy adhesives. GelMagic can be post-cured up to 140 degrees for even greater performance. |
|
||||||||||||||||||||||||||||||||||
|
|
|
 |
|
|
|
EZ Fillet is a wood flour-filled two-part putty specifically designed for stitch-and-glue wooden boat construction. Its ketchup-like, self-leveling consistency allows it to be measured by volume or weight. The resin (part A) is brick red in color while the hardener (part B) is a deep, dark green. A rich brown wood tone results when the two parts are combined indicating complete mixing. The putty thickens after mixing to form an easy to spread, thixotropic compound, which stays put and will not run or sag. EZ Fillet has been designed for superior strength and workability and can be used by itself to create smooth cosmetic fillets or as a structural fillet when combined with fiberglass cloth. EZ Fillet can be applied by spatula or caulking tube. A convenient pastry bag technique can be used by snipping off the corner of a plastic food storage bag and filling it with mixed EZ Fillet. Adjust the size of the hole to deliver just the right amount of EZ Fillet. |
|
|||||||||||||||||||||||||
|
|
|
 |
|
|
|
QuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded parts have a non-sagging, butter-like consistency and are easily mixed to form a third color. At 70°F. QuikFair is sufficiently cure to be hand-sanded in 3 hours or machine sanded in 4 hours. This allows the user to apply three coats each 24 hours in a standard eight-hour shift or six in a round the clock basis. |
|
||||||||||||||||||||||
|
|
|
|
|
 |
|
|
|
Clear Coat Epoxy, an extremely low viscosity, clear, water white, solvent free “penetrating” epoxy system. Clear Coat is ideal for clear coating wood, wetting out fiberglass cloth for bright finished boats and for dry rot saturation-repair. Use as primer (base) for clear linear polyurethane or varnish coatings and as a penetrating first coat for blister repair on fiberglass boats. Use also for those applications that require long pot life and low viscosity. Clear Coat cures to a brilliantly clear, very tough finish without the usual “amine blush” associated with some epoxy resin films. Clear Coat contains no volatile solvents. Use Clear Coat as the sole epoxy system to make wood strip canoes and kayaks. Sand and varnish Clear Coat in order to avoid water spotting. See Technical Data Sheet and MSDS for additional information. |
|
|||||||||||||||||||
|
|
||||||||||||||||||||||||||||
|
|
|
 |
|
|
|
SB-112 Epoxy Resin is a clear, ultraviolet light stabilized, almost water-white high modulus epoxy system. Originally formulated for use in building sailboards and surfboards over extruded polystyrene cores. SB-112 has also become popular in wooden boat fabrication for coating and laminating where clarity is a prime consideration. Unlike many epoxy resins, SB-112 will cure to a clear, glossy, blush-free surface. Kit contains Resin and Hardener. See Technical Data Sheet and MSDS for additional information. |
|
|||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
MirrorCoat™ is a two-part epoxy resin system specially designed to create a high gloss, clear decorative coating for wood and other materials. MirrorCoat is a pourable and self-leveling epoxy resin system formulated for coating bar tops and similar applications. Properly applied the resulting surface will have a high gloss finish. Not recommended where material will be exposed to considerable sunshine. See Application Guide for complete instructions. |
|
|||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||
|
|
|
 |
|
|||||||
|
|
|
 |
|
|
|
Quick Cure® is the definitive “five-minute epoxy” for fast, permanent repairs to wood, fiberglass, concrete, ceramics, glass, leather and plastics. Quick cure is water resistant and ideal for all small jobs requiring a strong bond and rapid cure. See Technical Data Sheet and MSDS for additional information. |
|
|||||
|
|
|
 |
|
|||||||||||||||||||
|
|
|
 |
|
|
|
T-88® is a high performance, gap filling, water proof, two part structural epoxy adhesive designed to provide superior results under adverse conditions. May be used without modifications in normally filled joints. See Technical Data Sheet and MSDS for additional information. |
|
|
||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||
|
|
|
 |
|
|||||||||||||
|
|
|
|
|
|
|
|
|
RotFix® epoxy wood restoration system. Make repairs that last, penetrates deep into deteriorated and rotted wood, creating a strong solid base for restoration. For interior or exterior use. Use RotFix to replace damaged wood. See Technical Data Sheet and MSDS for additional information. |
|
|||
|
|
||||
|
||||||||||||||||
|
|
|
|
SculptWood® is a moldable, carvable, sandable epoxy putty for replacement of damaged wood. Ideal for replacing missing sections of windowsills, frames and furniture or adding new sections to existing sections. SculptWood will accept paint, screws and nails. Porous, rotted or deteriorated wood should first be treated with a low viscosity system such as Rotfix. See Technical Data Sheet and MSDS for additional information. |
|
|
 |
|
||||||||||||||||
|
|
|
 |
|
|||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
West System® Epoxy is a versatile, high quality, two part epoxy that is easily modified for a wide range of coating and adhesive applications. It is used for construction and repairs requiring superior moisture resistance and high strength. It bonds to fiberglass, wood metal, fabrics, and other composite materials, and is especially suited for marine applications. 105 Epoxy Resin is the base material for the West System family of products, on which all of the West System compounds are built. The resin is a clear, pail yellow, low viscosity liquid epoxy resin. Formulated for use with West System hardener, it can be cured in a wide temperature range to form a high strength solid with excellent moisture resistance. 205 Fast Hardener is a medium viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops it’s physical properties quickly at room temperature. When mixed with 105 Resin in a five part to one hardener ratio by volume the cured resin/hardener mixture yields a rigid, high strength, moisture resistant solid with excellent bonding and coating properties. Not intended for clear coating. 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time and cure time is needed or to provide adequate working time at elevated temperatures. When combined with 105 Resin in a five part to one hardener ratio by volume the cured resin/hardener mixture yields a rigid, high strength, moisture resistant solid with excellent bonding and coating properties. Not intended for clear coating. |
|
|||||||||||||||||||||||||||||||
|
|
|
|
Epoxy cures faster in warmer temperatures and thicker applications-Epoxy cures slower in cooler temperatures and thinner applications. |
|
|
|
Consult User Manual and MSDS for additional information. |
|
|
 |
|
|
|
|
|
||
|
Dispensing and Mixing |
||
|
|
|
|
|
||||||||||||||||||||||
|
|
|
|
|
Basic Techniques: Bonding |
||
|
|
||
|
|||||||||||||
|
|
|
|
|
Applying Fabrics |
||
|
|
||
|
||||||||||||||||||||||
|
|
|
|
|
 |
|||
|
Installing Mini Pumps |
|||
|
|
|||
|
|||||||
|
|
|
|
|
|
Fairing |
|||
|
|
|||
|
|||||||||||||
|
|
|
|
|
|
We are now stocking Resin Research Epoxy. It is a 2:1 ratio room temp. Cure epoxy that is water-white. Resin Research Epoxies are specially formulated for building surfboards but are also suitable for other applications where a clear finish is desirable and the need exists for an epoxy that exhibits good UV resistant characteristics. As with most epoxies its properties will greatly improve by post curing the part. |
|
|
|
|
|
||||||||||||||||||||||||
|
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
|
||||||||||||||||||||||
|
|
|
|
|
|
Kwick Kick Epoxy |
|||
|
The fastest setting hand lay up epoxy yet. As fast or faster than polyester resins. Mimics polyester resin in curing by thickening in a similar way but without the hard gel time. This system has only one speed, FAST. With set times as fast as 30 min. you can use it in almost any bind. Compatible with other Resin Research systems so this can be dropped into production when speed is necessary. |
|||
|
||||||||||||||||||||||
|
|
|
|
Resin Research Epoxy additives. Additive F is a surfacing agent to facilitate sanding, use 1ml per ounce of hardener. The X-55 accelerator decreases cure time. These are for use with Resin Research Epoxies only. |
|
|||||||||||||||||||||||||
|
|
|
|
|
|
|
|
MAS Epoxies |
|||||
|
The MAS 2:1 Epoxy System is NO BLUSH, low viscosity, low odor, and easy to use. Great for beginners, loved by professionals, whether you’re building or repairing boats or anything else with fiberglass.A combination of two resins, 1 thick, 1 thin and 3 non-blushing hardeners are all blendable at a 2:1 mix ratio to meet any shop conditions. Save time and work faster. No messy wash downs, no paint failures. |
|||||
 |
|||||
|
||||||||||||||||
|
|
|
 |
|
||||||||||||||||
|
|
|
 |
|
||||||||||||||||||||||||||||
|
|
|
 |
|
||||||||||||||||||||||||||||
|
|
|
 |
|
|||||||||||||||||||||||||||||||
|
|
|
 |
|
|||||||||||||||||||||||||||||||
|
|
||||||||||
|
|
|
|
|
Miscellaneous Epoxy |
||
 |
||
|
||||||||||
|
|
|||||||
|
|
|
|
Prices Subject to change without notice. |
|
|
|
Fiberglass Supply 11824 Water Tank Rd. Burlington, Washington USA |
|
|
||||||||||||||||||||
